Painting Department

Starter Kit

It is important that the surface of the pieces to be painted is adequately clean to allow perfect adhesion of the paint. The presence of surface contamination and greasiness would give rise to defects such as pitting, chipping and coverage irregularities (orange peel effect, roughness). A perfectly clean surface is ideal for the best painting result.

DBM Tecnologie has in its production range all possible single chamber and multi-tank washing technologies:

  • WATERFALL
  • LOW BOILING SOLVENTS
  • MODIFIED ALCOHOL

and can thus propose the most suitable system for your production, logistical and qualitative needs of the customer.

The central point of the process. The types of painting depend on factors such as the morphology of the piece, its positioning on the support (on a frame, flat...), the type of paint, the production rate.

DBM Tecnologie offers painting systems and booths designed to meet different needs.

Particular attention is paid to abatement systems, which are designed to have the lowest environmental impact and at the same time minimize waste.

The pre-curing of the paint is essential for the initial evaporation of the solvent and for uniformly spreading the paint on the pieces.

To meet this need, DBM Tecnologie has always produced the SAR stations.

Once the paint has passed this phase it is time to face drying (or cooking) in a special oven.

The static ovens made by DBM cover all dimensional and temperature requirements, with the possibility of managing differentiated cycles and accommodating both workpiece trays (in the P series ovens) and trolleys (in the FS series ovens).

Furthermore, there is a line of automatic ovens that incorporates both phases described above (pre-curing and drying), allowing the loading and transport of pieces on the frame without any risk related to handling.